-
Setup of prototyp drawing (dwg)
We tried every possibilites, but finaly we adjusted it manualy by command in AutoCAD "move". I don´t know, where is problem. When the drowings little out of center of drowing we let it be. When it seems bad we moved it on right place in drawing.
-
Setup of prototyp drawing (dwg)
Sending screenshot of "define the layout".Attachment: setup.zip
-
Setup of prototyp drawing (dwg)
Sending attached files. Thank youAttachment: 00.ZIP
-
Setup of prototyp drawing (dwg)
I have a problem with setup of prototype drawing. When I set up the position of details in drawing by the"define the layout" (I don´t know exact name of this command in EN AS). I set the initial node (x,y)and space between columns and rows (5mm) and space between details (5 mm) (see attached picture).But when I use this prototype in AS (in process drwings), the position of details is different than i setup in prototype.Where is the problem? (please see attached model, drawing and prototype A4)Thank you -
The same parts give the different part number
Oh I´m sorry for this. I must overlook it. Thank you very much for your solution. -
The same parts give the different part number
Thank you for your answer.I have a new problem with numbering. Advance still give the different number to same plate. I tried check by Audit, but audit find no error. Geometry is same.This problem arose after I change the thicknes of existing plate and after I copy this plate beside (Change from Plate 28mm to Plate 15mm and Plate 12mm).Problem is with part 116 and 121 (P12x70x70) and with part 128 and 129 (P25x70x70).See the attached bellow.Thank youAttachment: stožár_559_3d_R_T_0.zip
-
The same parts give the different part number
Thank you very much for your solution. I checked all bolts, but holes not. May I ask you, how can I findthe double holes? Is in the Advance steel any utility or command for finding doubl holes, or bolts, or beams?Thank you -
The same parts give the different part number
All parts are ok except part 108 and 110. This parts are same.Thank you.Attachment: stožár_559_3d_R_T.zip
-
The same parts give the different part number
I have a problem with numbering. For example, I have a four same beams. Beams have a holes for boltsand dimensions of all columns are same. When I run the numbering Advance steel gave the different number to two columns (e.g. 1001 and 1002) and to others two give the same number (1003).I tried to check it by "find the difference between two parts" but advance said that diffrence is in geometry but geometry is same. I checked it. Dimensions, position of holes and diameters are same.Have you any idea where is problem?Thank you for any answer.