Dear Anna,I can't agree with your reply! - hatching is a very basic functionality and lack of it is something as lack of possibility to draw lines in AutoCad!Please note that it was working on earlier versions of Advance Cad.Actually I can't generate professional looking drawings on a very expensive software!I bought subscription, but after that... Autodesk change their mind and do not made Advance Cad release 2016.I have no plans to pay few thousands of Euros for AutoCad 2016 only to have hatch functionality - especially looking at Advance Concrete differences between version 2015.1 and 2016.Generally... it looks as it is mainly number change without serious developing! I am afraid, that situation is similar to Autodesk Structural Detailing software, that after few years of mainly changing software number it will be dead!BTWPlease find attached PDF document downloaded 15-12-2014 from official Graitec site (my license and one year subscription was bought on 11-12-2014... so few days earlier) in which stayed on page No 7 paragraph 23, that:"N.B. Autodesk have confirmed that version 2016 of Autodesk Advance Steel and Autodesk Advance Concrete (available in April 2015) will only be compatible with the equivalent AutoCAD 2016 version and GARITEC Advance CAD 2016 version but will not be supported on any previous AutoCAD versions."So... due to my subscription contract I should receive Advance Cad 2016 to had possibility to use Advance Concrete 2016.From my point of view... Graitec should at least bring back hatch functionality to Advance Cad 2015.1 - if it is not possible (for any reason) I can buy AutoCad 2016... but only with similar discount as had Advance Steel 2015.1 buyers (78%) so AutoCad cost was 1050 EUR.Best Regards,Andrzej Wegner
Attachment: AS-AC-Licensing-Procedure-FAQ-2015-EN.rar